CeTeau Segmental Reinforced Block Wall
• Proven and recognised reinforced soil technique with numerous worldwide successful projects
• Possibility of using site-won backfill, therefore providing further savings
• Fast and easy to construct
• Area behind wall can be trafficked straight away
• Structures designed for 120 years life
• No practical height limitations
• Cost savings over traditional reinforced concrete solutions
• Can be designed for various surcharge loading applications
• Variety of facing types and colours to suit client requirements
• Better resistance to dynamic effects arising from settlement or seismic activity.
• Highway walls
• Bridge abutments
• Erosion control
• Noise barriers
• Green walls
CeTeau uni-axial geogrids are meshes with elongated apertures made from high density polyethylene (HDPE). Their principal characteristic is good creep performance with low strain and high strength under constant load.
The following characteristics attribute to the quality of CeTeau grids; rib thickness, shape and stiffness, aperture size and modulus.
CeTeau uni-axial grids are manufactured in a modern factory with state of the art machinery and 24 hour quality control by an in-house fully equipped laboratory."
CeTeau C-Blocks are pre-cast wall facing units, which form a integral wall by the unique tongue and groove design. The tongue design and slightly tapered sides allows the blocks to be placed in a in- or outward radius of up to 2.75 meter. The groove dimension determines the batter of the wall and allows space for the connector strips, providing excellent load distribution.
Several facing options and colour pigments are available depending on the wishes of the client. The block facing size is 200 by 400 mm and features a internal cavity in order to save weight.
A critical factor in the performance of the reinforced retaining wall structure is the connection between the geogrid and the block wall facing units.
The CeTeau connector strips deliver a 100% effective mechanical connection with the geogrids and the C-blocks to form a totally integrated system. Using a continuous connector strip embedded in the tongue and groove of the C-block guaranties uniform load distribution between the grid and the blocks.
Dry-castorzero-slump concrete block products began in the United States in 1876, making one block unit at a time.
CeTeau cell provides excellent
protection for slopes against
Geogrids have been developed to overcome the bearing limits of
CeTeau Block Wall
CeTeau segmental reinforced blocks wall, Economical, Flexible
The use of geotextile manufactured
into a containment product has
Geotextiles have secured a valued
and permanent place among
PVC Sheet Piles
CeTeau PVC sheet piling systems
are the new standard with many
CeTeau Clay Liner
Geosynthetic clay liners are high performance environmental liners
Geomembranes are widely used for containment of liquids, solids
CeTeau Silt Protector
Silt Protector is a flexible membrane product that has
Turn need into virtue and generate income from waste products
For over a century, triple twist
hexagonal mesh has been used
The use of CeTeau composite strip drains for lateral drainage
The innovative CeTeau Vacuo is designed to accelerate the
Vibro Stone Columns
In order to be able to offer the full spectrum of soil improvement
Timber Wall Retention
CeTeau timber wall retention is a structurally engineered walling
Vertical Wick Drain
Prefabricated Vertical Drains (PVD),
also called Wick Drains, are
CeTeau Water Stop
Waterstop-RX is a flexible